Comparative study on effect of blending,thermal barrier coating (LHR) and injector nozzle geometry on biodiesel-fuelled engines

Increased petroleum prices, increased threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for internal combustion engines. Evolving suitable technology for addressing energy crisis creates a continued investigation into the search for sustainable and clean-burning renewable fuels. This work investigates suitability of different non-edible-derived biodiesels such as cotton seed oil methyl ester (COME), Honne oil methyl ester (HnOME) and Rubber seed oil methyl ester (RuOME) to four stroke, single cylinder compression ignition (CI) engine. Engine tests were conducted to study the effect of fuel blending, thermal barrier coating (TBC) or Low Heat Rejection (LHR) and injector nozzle geometry on the performance, combustion and emission characteristics of COME, HnOME and RuOME in the modified CI engine. Blends of biodiesels with diesel were varied from 20 to 80% in steps of 20%. Two thermal barrier coatings of partially stabilized zirconium (PSZ) and aluminium oxide (Al₂O₃) were provided on the engine to make it fully adiabatic. Nozzle injectors of 3, 4 and 5 holes, with size of orifice varied from 0.2 to 0.3 mm size were selected for the study. It was concluded that B20 biodiesel blend, PSZ-coated engine and four hole nozzle injector of 0.2 mm size resulted in overall better engine performance with increased brake thermal efficiency (BTE) and reduced HC, CO, smoke emissions for the fuel combinations tested. Combustion analysis to study the effect of biodiesel blends, LHR coatings, injector nozzle geometry on the performance of the biodiesel-fuelled engine has been presented to give more insight into the behaviour of operation.     

Two-echelon closed-loop supply chain deterministic inventory models in a batch production environment

This paper considers a two-echelon closed-loop supply chain consisting of a manufacturer and a remanufacturer at the upper echelon and a retailer at the lower echelon. The retailer faces a constant demand from customers, which is satisfied through recovered and new products received from the remanufacturer and the manufacturer, respectively. The manufacturer produces the product with finite rate, whereas the recovery of returned product is instantaneous at the remanufacturer. We develop three models to determine the optimal production-inventory policy of the players for minimizing the joint total cost of the system. In the first model, the retailer receives the product in batches from the manufacturer and the remanufacture simultaneously, whereas in the second and third models, the batches are received alternatively. In the third model, however, the procurement of raw material at the manufacturer is also considered. Numerical illustration is presented to examine the impact of certain key parameters.     

大气污染排放窗口机制研究

以2种典型的污染排放源(点污染源和线污染源)为基础,提出排污窗口的概念,通过参数转换分解源强对污染扩散进行研究。首先在高斯污染扩散模型的基础上,对非持续性污染源强建模,然后以某烟囱的周期性排污分析,检验排污窗口设置的合理性。对于单双号限行的窗口性质的污染排放研究中,首先对交通流建立线污染扩散模型,然后融合元胞自动机(9元胞互影响)模拟区域多角度污染的扩散平衡,最后对"单双号限行"下北京市不同区域空气质量指标进行分析与仿真。分析结果表明,合理的排污窗口能够减轻污染程度及对人们日常生活的影响。     

An experimental apparatus for testing biodiesels based on a CFR engine—setup and validation with different methyl ester blends

A cooperative fuel research (CFR) engine was modified and instrumented in order to control operating conditions and to measure engine parameters and in-cylinder pressure diagrams. Aiming at the comparison of different alternative fuels, an experimental procedure was defined, including cetane number (CN) evaluation and the definition of engine operating quantities in different working points, for fixed levels of compression ratio (CR) and injection advance. An investigation was made considering several blends of methyl-esters of rapeseed oil (RME) and of a mix of vegetable oils (VOME) with conventional diesel oil. The defined experimental procedure was applied to assess CN, engine brake thermal efficiency (bte) and exhaust emissions. Results show that the biodiesel content has a positive influence on soot emissions, with strong reduction, while thermal efficiency and NO_X emissions are negatively affected, which can be justified taking into account fuel properties and changes in combustion process. As observed outcomes are generally in line with those presented in literature, the facility proved to be a suitable tool for basic investigations on alternative fuels to be used in specific applications.     

基于多区域投入产出(MRIO)的中国区域居民消费碳足迹分析

近年来,居民消费活动和环境的关系逐渐受到关注,而与温室气体排放相关的研究更是其中的热点.因此,本文采用“居民消费碳足迹”概念来定义特定居民消费活动所导致的直接和间接温室气体排放的总和,主要包括CO2、CH4、N2O3种温室气体;构建了基于环境扩展的多区域投入产出(Multiregional input-output,MRIO)模型的碳足迹核算方法,并以2007年中国8个区域为例对其居民消费碳足迹的数量、构成、分布及转移进行了分析.结果显示,2007年全国居民消费碳足迹总量达到31.74亿t(以CO2当量计).此外,碳足迹还呈现出区域差异明显、间接排放大于直接排放、城乡差距过大等特征.人均碳足迹方面,发展水平较高的京津、东部沿海地区明显高于相对滞后的西北、西南区域.研究还对碳足迹的区域分布和转移进行了深入探讨.结果发现,东北、京津、西北和西南区域转移收支为负,表示这些区域为其他区域承担的排放大于其他区域为其承担的排放;剩余的北部沿海、东部沿海、南部沿海和中部区域情况则正好相反.这些结果对现阶段中国制定具体区域消费政策或分配碳减排责任等具有参考价值;本研究的方法论也适用于研究其他环境因子及足迹因子与居民消费的关系.     

多哈气候会议结果分析

本文总结和分析了多哈气候会议的谈判热点和成果,特别介绍涵盖2013至2020年的《京都议定书》第二承诺期的要点;展望了计划于2015年达成新的有法律效力的全面的国际气候协议。     

船舶大气污染排放的研究进展

船舶是大气污染的重要来源,其排放的NOx占化石燃料源的15%左右,SO2占人为源的4%~9%。国内外从3个方向开展对船舶大气污染的研究:(1)对大气气候影响;(2)源清单计算;(3)排放因子测量。船舶排放的多种污染物可改变空气质量;对大气辐射收支产生直接和间接影响;对海洋大气的成云效应产生影响。船舶源清单主要有2种计算方法:基于燃料消耗的方法,适用于长时间大尺度计算;基于船舶活动情况的方法,适用于高空间分辨率计算。排放因子测量有台架试验和空中烟羽测量2种方法:前者测量结果准确,条件设定自由;后者可行性高,并能提供颗粒物增长转化信息。国内研究尚处于起步阶段,需要建立完整的船舶排放清单,开展排放因子的测试和修正工作。     

浦东新区“十二五”主要工业污染物排放总量预测及控制对策研究

文章以2010年污染源普查动态更新数据为基础,分析了目前浦东新区主要工业污染物的排放现状,掌握了浦东新区工业源主要能源消耗及污染物排放情况,重点工业源主要污染物行业分布和时空分布。根据浦东新区社会经济发展和环境保护的实际情况,采用情景分析法,设置三种不同工业增加值年增长率情景对浦东新区2015年主要工业污染物的排放量进行了预测,并结合浦东新区“十二五”主要污染物排放总量控制目标作了可达性分析,在此基础上,提出了浦东新区“十二五”主要工业污染物总量控制的对策措施。     

基于实时交通信息的道路机动车动态排放清单模拟研究

以上海市为例开展了实际道路车流分布、行驶工况和车辆技术的实地调查,建立了道路车流、VSP分布和车辆技术数据库.在此基础上,基于实时的车流、车速等交通信息,构建了动态化的道路机动车污染物排放清单模拟方法,并开展了城区典型道路的机动车小时排放模拟案例研究.调查结果表明,上海市城区道路车流以轻型客车和出租车为主,分别占各时段车流总量的48%～72%和15%～43%;VSP分布与平均车速存在较好的规律,各车型VSP峰值随平均车速的上升向高负荷去移动,且峰值逐渐降低;当前上海市车辆以国2和国3车型为主,经过年检站调查结果的校正,国2和国3车型分别占各车型的11%～70%和17%～51%.模拟案例结果显示,道路机动车CO、VOC、NOx和PM日排放峰谷比可达3.7、4.6、9.6和19.8左右,CO和VOC排放主要来自轻型客车和出租车,与车流变化的相关性较好,而NOx和PM排放主要来自重型客车和公交车,且主要集中在早晚高峰时段.采用建立的动态排放模拟方法可实时反映实际道路的机动车排放变化,获取高排放路段和时段,为交通环境管理提供重要的技术手段和决策依据.     

广东省船舶排放源清单及时空分布特征研究

分别采用基于船舶引擎功率和耗油量的排放因子法,估算了广东省地区2010年的船舶排放清单,并选取客货运输吞吐量、航道通航能力因子和港口地理坐标等数据作为权重因子,研究了该地区各类船舶排放的时空分布特征.结果表明,广东省各类船舶在2010年的SO2、NO x、CO、PM10、PM2.5和VOCs排放总量分别为14.6×104t、23.1×104t、3.0×104t、7.9×103t、7.2×103t和9.3×103t.广东省客货运输船舶月排放波动较小;渔业船舶在1月、4月和11月份的排放比例最高.广东省客货运输船舶水域排放集中在西江干线水道和珠江三角洲高等级航道网内,港口排放主要分布在广东省珠江三角洲沿海发达城市地区;渔船港口排放量呈显著的沿海条带状空间分布特征.